More Chassis Clean up
Another few hours have been spent in the garage working on the landrover. I managed to get the towbar off and ther rear lights.
The towbar was VERY difficult to remove, the rust and time had siezed the 15/16 bolts very tight. Breakerbar + Handwinch bar was used to extract them. The Rear lights had to have their bolts cut with the grinder unfortunately as the screws were seized. At some stage the wiring has shorted out to the rear of the vehicle as there is a fried wire and plastic sheath oozing from the chassis at some points, which means we might have to replace the loom to the rear of the vehicle 
One shock was removed, and I thought it was too good to be true when trying the drivers side, this bugger is tight and will require a second pair of hands.
I also attempted to fix the rear light protcetor bar by welding it up, not bad for my first weld in 2 years, but will need the tidy up of a pro I think!
Photo’s of the day:
More photos here